Interactive 3D · AI Chief Engineer · Built from maker drawings
Open up the
engine room.
3D models of ship machinery you can rotate, cut open and take apart on your phone. The Chief, your AI engineer, explains every part, in clear, practical language.
Join early access
Be one of the first to test it. Takes 30 seconds.
The machines
The whole engine room, one machine at a time.
Each machine is built from one maker's drawings and checked by a sailing engineer before it opens to testers. More machines are on the way. Tell us which ones you want when you join. Your vote sets the order.
Why we're building this
You can't open running machinery at sea.
Here you can.
How it works
Six ways into every machine
Your AI engineer
Meet the Chief.
He talks you through every machine in a natural voice, lights up each part as he names it, and answers the questions examiners actually ask. Try one:
Test yourself · one oral question · 2-stage marine air compressor
On a two-stage air compressor the interstage pressure is reading higher than normal. Where is the problem most likely?
If the 2nd stage valves leak, air is pushed back to the interstage side and its pressure rises; keep going and the 1st stage relief valve lifts. Problems in the 1st stage (A, C, D) make the interstage pressure fall instead.
How we build accuracy
Not a generic animation. The real machine.
For institutes and ship managers
Familiarise cadets and crew before they join.
Classroom licences and models of the exact machinery on your fleet.
Questions
Is it free?
Early-access testers use it free. Paid plans come later, once more machines are live.
Does it work on my phone?
Yes. It runs in your phone's browser, with no app to install.
Which makers and models?
Each machine is one specific model, built from that maker's drawings. Tell us the models on your ship when you join.
Is it accurate enough for orals?
Names, functions and normal operating readings come from the maker's manual, and a sailing engineer reviews them. Anything not in the drawings is marked "typical".
Is it an approved simulator or course?
No. Engineroom3D is a study aid for understanding machinery and preparing for orals. It is not a certified simulator, not approved by DG Shipping, and does not replace the maker's manual or your company procedures. See our Terms of Use.
Does it work offline on board?
Not yet. An offline mode for ships with limited internet is planned.